World > North America > United States > Connecticut
Doppler Radar Loop Weather in Guilford, ConnecticutGuilford, Connecticut Radar Weather

Guilford Doppler Radar Loop

Weather Radar Loop for Guilford, ConnecticutDoppler Radar Loop Weather in Guilford, CT
Lat: 41.28N, Lon: 72.68W  ICAO: KMMK
Web Search
Current Conditions: Clear, the temperature is 30°F-1°C, humidity 60%, dew point 18.0°F-8°C. Barometric pressure is 29.97 in1015 mb. Wind direction is NNW at 6 mph10 km/h with visibility of 10 mile(s) mi16 km. °F Click to change Guilford radar loop current conditions to Imperial units.Click to change Guilford radar loop current conditions to Metric units. °C
Set page refresh:

Pass this page to a friend. Tell them to point their camera at the QR Code near the bottom of this page.


Clear Air dBZ Scale Precipitation dBZ Scale
Rainrate - inches per hour

The colors are the different echo intensities (reflectivity) measured in dBZ (decibels of Z) during each elevation scan. "Reflectivity" is the amount of transmitted power returned to the radar receiver. Reflectivity (designated by the letter Z) covers a wide range of signals (from very weak to very strong). So, a more convenient number for calculations and comparison, a decibel (or logarithmic) scale (dBZ), is used.

The dBZ values increase as the strength of the signal returned to the radar increases. Each reflectivity image you see includes one of two color scales. One scale (far left) represents dBZ values when the radar is in clear air mode (dBZ values from -28 to +28). The other scale (near left) represents dBZ values when the radar is in precipitation mode (dBZ values from 5 to 75). Notice the color on each scale remains the same in both operational modes, only the values change. The value of the dBZ depends upon the mode the radar is in at the time the image was created.

The scale of dBZ values is also related to the intensity of rainfall. Typically, light rain is occurring when the dBZ value reaches 20. The higher the dBZ, the stronger the rainrate. Depending on the type of weather occurring and the area of the U.S., forecasters use a set of rainrates which are associated to the dBZ values.

These values are estimates of the rainfall per hour, updated each volume scan, with rainfall accumulated over time. Hail is a good reflector of energy and will return very high dBZ values. Since hail can cause the rainfall estimates to be higher than what is actually occurring, steps are taken to prevent these high dBZ values from being converted to rainfall.