World > North America > United States > New York
Doppler Radar Loop Weather in Strykersville, New YorkStrykersville, New York Radar Weather

Strykersville Doppler Radar Loop

Weather Radar Loop for Strykersville, New YorkDoppler Radar Loop Weather in Strykersville, NY
Lat: 42.70N, Lon: 78.45W  ICAO: KBUF
Web Search
Current Conditions: Clear, the temperature is 55°F13°C, humidity 87%, dew point 51°F11°C. Barometric pressure is 30.21 in1023 mb. Wind direction is S at 6 mph10 km/h with visibility of 10.00 mi16 km. °F Click to change Strykersville radar loop current conditions to Imperial units.Click to change Strykersville radar loop current conditions to Metric units. °C
Set page refresh:

Helpful Tip: Type the letters wx in the search engine next time you need to find us.

Feedback

Clear Air dBZ Scale Precipitation dBZ Scale
Rainrate - inches per hour

The colors are the different echo intensities (reflectivity) measured in dBZ (decibels of Z) during each elevation scan. "Reflectivity" is the amount of transmitted power returned to the radar receiver. Reflectivity (designated by the letter Z) covers a wide range of signals (from very weak to very strong). So, a more convenient number for calculations and comparison, a decibel (or logarithmic) scale (dBZ), is used.

The dBZ values increase as the strength of the signal returned to the radar increases. Each reflectivity image you see includes one of two color scales. One scale (far left) represents dBZ values when the radar is in clear air mode (dBZ values from -28 to +28). The other scale (near left) represents dBZ values when the radar is in precipitation mode (dBZ values from 5 to 75). Notice the color on each scale remains the same in both operational modes, only the values change. The value of the dBZ depends upon the mode the radar is in at the time the image was created.

The scale of dBZ values is also related to the intensity of rainfall. Typically, light rain is occurring when the dBZ value reaches 20. The higher the dBZ, the stronger the rainrate. Depending on the type of weather occurring and the area of the U.S., forecasters use a set of rainrates which are associated to the dBZ values.

These values are estimates of the rainfall per hour, updated each volume scan, with rainfall accumulated over time. Hail is a good reflector of energy and will return very high dBZ values. Since hail can cause the rainfall estimates to be higher than what is actually occurring, steps are taken to prevent these high dBZ values from being converted to rainfall.